All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
48
7.0. Operation
7.4. Malfunctions and troubleshooting
Description
Cause
Remedy
Machine does not riddle
properly in the area of the
baffle plate.
Synthetic turf area is too
wet.
Reduce the driving speed
accordingly.
Leave the area to dry more.
Reduce working depth
accordingly.
Driving speed too high for
dry working conditions.
Reduce the driving speed
accordingly.
Reduce working depth
accordingly.
Unsuitable screen
combination.
Check screen combinations,
(see Chapter 6.8.)
Unsuitable screen setting.
If necessary, set screen
setting one level flatter.
Unsuitable baffle plate
setting.
Only if there has been no
improvement as a result of
the previous measures.
Screen frequency may be
too low.
Check PTO shaft speed;
should be in the region of
480 - 540 rpm.
Absorption quality is
unsatisfactory
Brush frequency may be too
low.
Check PTO shaft speed;
should be in the region of
480 - 540 rpm.
Gap is too wide between
baffle plate and brushes.
Check brushes, if necessary
replace strip brushes
(see Chapter 8.5.)
Work site is badly littered.
Clean the area twice
Adjust cleaning intervals to
the level of contamination;
see Care Intervals
(see Chapter 8.2.).
