Kunststoffschweißtechnik
Product
description
Chapter 1
23.09.2014
Working Instructions WIDOS Miniplast / 2 IR
Page 7 of 43
1.4. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the European standard specifications.
The development, manufacturing and mounting of the machine were executed very carefully.
1.5. Designation of product
The product is designated by a sign at the frame.
It contains the type of the machine, the serial number and the year of construction.
1.5.1. Technical
data
1.5.1.1.
WIDOS Miniplast / 2 IR – general data
Material:
PP, PVDF, PFA, (PE for contact welding)
Pipe diameter range
Outside Ø = 20 – 110 mm
Weight (without packing):
appr. 35 kg
Emissions:
- The acoustic pressure level during planing is below 75 dB
(A)
- Through the use of the stated plastic materials during
operation within a temperature range of up to 520° C toxic
vapors might be generated. It is indispensable to care for
good ventilation and exhaust in case of higher temperatures
-. When using the named pipe materials and when welding
below 260 °C no toxicant damp arises.
Ambient conditions in the
welding area:
- Keep the workshop clean (no dust at the welding area)
- do not weld below 5° C, if necessary preheat
- avoid humidity, if necessary use a welding tent
- avoid strong sun rays influence
- protect from wind, shut the pipe ends
Dimensions:
appr. 600 x 600 x 400 mm
Protection category:
IP 54
Packing:
wooden crate
