Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
23.09.2014
Working Instructions WIDOS Miniplast / 2 IR
Page 19 of 43
4.5.1. Height
adjustment
The right clamping tool may be adjusted in order to compensate
the height.
For this purpose detach the pan-head screws and shift the
clamping tool on the sloping platform (arrow) until the height is
balanced.
Afterwards necessarily tighten the pan-head screws again.
4.5.2. Cross
adjustment
The left clamping tool may be adjusted in transverse manner to
the axis in order to compensate differences.
Detach the two pan-head screws on the left side and shift the
clamping tool (arrow) until the difference is balanced.
Afterwards tighten the 2 pan-head screws again.
Pan-head screw for height adjustment
Pan-head screw for cross adjustment
