widos Miniplast / 2 IR, Working Instructions Translation

Page: 25 / 58

Kunststoffschweißtechnik
Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
Miniplast 2 / 110
OD 20 - 110
Maxiplast / 501 / 900 / 955
OD 50 - 160
Instaweld 160
OD 50 - 160
2000 / 3000 Kombi
OD 50 - 250
2500 DO 160 / 250 / 315
OD 50 - 315
ASM 160 / ASM 315
OD 50 - 315
PE 80
The value for heating element temperature is between 200° C - 220° C.
The
smaller
the pipe wall the
higher
the temperature.
PE 100
The standard value for heating element temperature is 220° C.
Increase the change-over time and the welding pressure time at PE 100 as fast as possible !
1 kp = 10 N
time to
change- reach full
over welding cool-down time
0,15 (PE)
time pressure
pressure in
T
desired temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall force bead time change- to reach force down
OD (s) [kp] min. [s] over welding [kp] time
[mm] [mm] [daN] [mm] time pressure [daN] [min]
[s] [s]

20
1,9 11 2 0,5 20 4 4 2 2
20
2,3 9 2 0,5 23 4 4 2 2
20
2,8 7,4 3 0,5 28 4 4 3 3
25
2,3 11 3 0,5 23 4 4 3 2
25
2,8 9 3 0,5 28 4 4 3 3
25
3,5 6 4 0,5 35 5 5 4 4
32
1,8 17 3 0,5 20 4 4 3 2
32
1,9 17 3 0,5 20 4 4 3 2
32
2,4 13,6 4 0,5 24 4 4 4 3
32
2,9 11 4 0,5 29 4 4 4 3
32
3,6 9 5 0,5 36 5 5 5 5
40
1,8 26 4 0,5 20 4 4 4 2
40
1,9 21 4 0,5 20 4 4 4 2
40
2,3 17,6 5 0,5 23 4 4 5 2
40
2,4 17 5 0,5 24 4 4 5 3
40
3,7 11 7 0,5 37 5 5 7 5
40
4,5 9 8 1 45 5 5 8 6
40
5,5 7,4 9 1,0 55 5 5 9 8
Table for PE
welding area
in welding area
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
P (N/mm²)
bead-up heat-up
23.09.2014 Working instructions WIDOS manual machine Page 25 / 1 of 43