Kunststoffschweißtechnik
Safety
rules
Chapter 2
23.09.2014
Working Instructions WIDOS Miniplast / 2 IR
Page 12 of 43
2.11.3. Danger
of
cutting
and drawing-in by planer, danger of squeezing
You may carry away injuries by cuttings up to fractures.
Wear tight fitting clothing.
Do not wear any rings or other jewelry during work.
If necessary wear a hairnet.
Do not touch the planer on the end faces.
Keep off a third party entering the swivelling range of the planer.
Do not touch in-between the clamped pipes.
2.11.4. Danger by toxic vapors
Toxic vapors may result from heating the plastic parts to a temperature of
500 °C
upon infrared welding (optional).
Care for good ventilation resp. exhaust.
2.12. Warranty and liability
Our „General Sales and Delivery Conditions“ are principally valid.
They are at the owner's disposal at the latest when signing the contract.
Warranty and liability demands referring to damages of persons or objects are suspended if
they are caused by one or several of the following reasons:
not using the machine according to the prescriptions
improper transport, building-up, starting and operating the machine and maintenance
operating the machine with defective or improperly installed security measures
ignoring the information given in this manual
structural changes at the machine without permission
unsatisfactory checking of machine parts which are worn out
repairs performed in an inexpert way
catastrophes by external influence and Acts of God.
