Kunststoffschweißtechnik
Operating and Indicating Elements
Chapter 4
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 20 of 78
4.4. Elements on the heating element and the planer
Name
Function
Control lamps, green
(Heating element)
There are 3 different states:
•
lightening,
only interrupted by short switch-off pulses: the heating
element is being heated up, the desired temperature is not yet
reached. The desired and the actual temperature are displayed
alternating on the display of the control.
•
blinking:
the temperature of the heating element is maintained by a
pulse-position ratio.
•
off:
the desired temperature has been exceeded, the heating
element is cooled automatically onto desired temperature, or the
heating element is switched off.
Cable
(Heating element)
Connect the heating element at the corresponding plug box (chapter
4.1, No. 12) on the CNC control unit.
On/off-switch
(Planer)
- During the planing process the planer has to be switched on at the
switch. The planing process is operated by the CNC control.
Cable
(Planer)
- Connect the planer at the corresponding plug box (chapter 4.1, No.
5) on the CNC control unit.
Locking device
- Locking the planer into basic machine by planning, unlock it by
pulling the ball knob in direction of arrow
Control lamps
green (3 pieces)
Connecting cable
with 16 pole plug
On/off-switch
Connection cable with plug CEE
(inclusive phase reverser)
Locking device
