Kunststoffschweißtechnik
Starting and Operating
Chapter 5
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 30 of 78
5.11. Welding Process
The basic machine is connected with the control unit
CNC 3.0
, the planer and the heating
element.
The control unit
CNC 3.0
is switched on, set and legitimated with the respective cards.
Now you can start the welding process. Please proceed as follows:
Display:
2
nd
line:
WIDOS 5500 CNC
22.11.2002 10:10
The type of the machine is displayed
Current date and time
button <Start>: menu welding parameters
Abort with button <C> if need be
→
basic menu
Display:
2
nd
line:
mat diam wall temp
PE80 225 20.5 206°
The welding parameters to be used for the following
welding are displayed
button <Start>: confirm welding parameters
Abort with button <C> if need be
→
basic menu
Only appears in case shortened cooling time is entered (Chapter: 5.14.4)
Display:
2. line:
Attn! shortened
cooling time
In case you have selected shortened cooling time, it is
reduced by appr. 40% compared to the one of DVS.
Activate the shortened cooling time with button <+>
Abort with button <C> if need be
→
basic menu
Display:
2
nd
line:
name of project
WIDOS .........
Enter name of project
button <+> and <->: select letters
button <Enter>: cursor jumps for 1 position to the right
button <Planer>: 5 storage locations for projects can be called
(when a new project is created, the oldest one is overwritten)
button <Start>: confirm
Abort with button <C> if need be
→
basic menu
Display:
2
nd
line:
number of joint
0000
Number of joint of the selected project
Enter and display the number of joint
button <+> and <->: select numbers
button <Enter>: cursor jumps for 1 position to the right
button <Start>: confirm
