Kunststoffschweißtechnik
Starting and Operating
Chapter 5
19.09.11
Working Instructions WIDOS 5500 CNC 3.0
Page 27 of 78
5.8. Switching the CNC 3.0 on
As soon as the control unit
CNC 3.0
is connected to the mains and switched on at the main
switch, the display is lightened (the computer is being initialised).
Display:
2
nd
line:
WIDOS GmbH
Germany
after a few seconds, the display changes
Display:
2
nd
line:
version: 0.00.00
serial no: 0000000
Number of the software version
Serial number of the machine
after a few seconds, the display changes
Display:
2
nd
line:
000 free weldings
0000
SD-card
Number of free memory capacity (RAM)
Number of free memory capacity SD-card
after a few seconds, the display changes
Display:
2
nd
line:
WIDOS 5500 CNC
please identify
The type of the machine is displayed
Following ways of legitimation are possible:
•
General legitimacy card and barcode reader
•
Gas legitimacy card and barcode reader
•
Reading in ISO legitimacy card with bar code
reader
after a few seconds, the display changes
Display:
2
nd
line:
initial position
button <Start> → machine moves into initial position
Display:
2
nd
line:
WIDOS 5500 CNC
22.11.2002 10:10
The type of the machine is displayed
Current date and time
„ B a s i c m e n u “
