39
Chapter 3 - Using SABRE
TM
Ranger Web Console
Settings
You can select the Ethernet mode to be used for data connection.
Follow these steps to select the Ethernet mode:
1. Select the mode to be used during the data connection.
2. Check the
Auto PDP Context Activation
checkbox if it is required to use Auto PDP Context Activation.
Click
Update
to allow the selection to take effect.
Click
Refresh
to query the current mode.
Note:
If the
Auto PDP Context Activation
is enabled, the terminal will establish a PDP connection upon power
up. After that, if the PDP connection is lost due to network deregistration or reasons other than user
intervention, the terminal will reestablish the PDP connection automatically.
Click
to select the Data menu.
Click the following tabs to view and edit the configuration settings for the SABRE™ Ranger terminal.:
Language
Terminal Info
Terminal
Ethernet
Telephony
PIN
SMS
Audio
ATCmd
Misc
Support
About
Settings Menu
