Wideye Sabre Ranger User Manual Download Page 19

Page: 19 / 75

Chapter 2 - Setting Up the SABRE

Ranger

4. With the gold-contacts facing down, position the SIM card as indicated and slide the SIM card into the slot.

5. Push the SIM cardholder down until it clicks and lock in place.

Follow these steps to connect the Multi-function and Heater cables:

1. Remove the running couplers and rubber gaskets from the cable glands attached to the Multi-function and

Heater power cables.

2. Thread the three connectors of the Multi-function cable and the connector of the Heater power cable through

the connector cover.

Connecting the Multi-function and Heater Power Cables

Heater power cable

Multi-function

cable

Rubber gasket

Cable gland

Rubber gasket

Cable gland

Metal running

coupler

Metal running

coupler

Summary of Contents for Sabre Ranger












































































Search results

Summary of Contents for Sabre Ranger

Reviews:

Related manuals for Sabre Ranger

Brands by name

Popular brands

Wideye Sabre Ranger, User Manual

Search results

Summary of Contents for Sabre Ranger

Reviews:

Related manuals for Sabre Ranger

Brands by name

Popular brands