11
Chapter 2 - Setting Up the SABRE
TM
Ranger
Follow these steps to position the SABRE™ Ranger terminal:
1. Remove two lock bolts and nuts on either side of the mounting frame.
2. Adjust the elevation of the SABRE™ Ranger terminal and secure its position using the two lock bolts and nuts on
either side of the mounting frame.
Follow these steps to mount the SABRE™ Ranger terminal:
1. Locate a vertical pole or column to mount the SABRE™ Ranger terminal.
2. Mount the SABRE™ Ranger terminal to the vertical pole or column using two U-bolts, four nuts and washers.
3. Tighten the four nuts evenly to secure the SABRE™ Ranger terminal to the vertical pole or column.
Mounting the SABRE
TM
Ranger
SABRE
TM
Ranger terminal
Lock bolt for elevation
Secure the U-Bolt
to vertical pipe or pole
Positioning the SABRE
TM
Ranger