38
Chapter 3 - Using SABRE
TM
Ranger Web Console
Port Forwarding
Port Forwarding is a feature for Router (multiple-user) mode. This feature sets the SABRE™ Ranger terminal to direct
incoming traffic on certain TCP/UDP port to a specific port on a local PC (IP Address).
Follow these steps to add a new forwarding rule:
1. Click
Add
.
2. Enter the
Incoming Port
number in the space provided.
(For example: the user expecting HTTP, the port is 80).
3. Enter the
Destination IP Address
.
(For example: the IP Address of the PC that is connected to the SABRE™ Ranger terminal).
4. Select the
Protocol
type:
TCP
(for HTTP, it will be TCP)
UDP
5. Enter the
Destination Port
number in the space provided.
[For example: listening port of the particular service (TCP port 80 for web server) on the PC that is
connected to the SABRE™ Ranger terminal].
6. Click
Apply
to allow the settings to take effect.
