background image

9

FX 250 / FX 500 User Manual

Main Unit

s

The FX 250 / 500 FleetBroadband system include the following main units:

FX 250

• 

FX 250 FleetBroadband BDU

• 

FX 250 FleetBroadband ADU

• 

Primary Handset

FX 500

• 

FX 500 FleetBroadband BDU

• 

FX 500 FleetBroadband ADU

• 

Primary Handset

3.1.1  Above Deck Unit (ADU), the antenna unit

The FX series ADU is Maritime FleetBroadband 3-axis controlled antenna. The antenna is 
self-tracking based on patented beam squint technology. The simple and robust electro-
mechanical system, with one motor per free axis, provides full coverage in azimuth and 
elevation. Tracking is accomplished by measuring signals being continuously broadcast 

from the satellite.

The radome covers the antenna equipments, which is composed of:

• 

Antenna Unit

• 

RF and GPS circuit

• 

Rotary joint

• 

Antenna pedestal

The  antenna  unit  includes  LNA  (low  noise  amplifier),  HPA  (high  power  amplifier)  and 
tracking receiver circuitry to ensure communication even in adverse circumstances.

Skipper FX 500

ADU

Class 8

FX 500

FX 250

Skipper FX Primary 

Handset

Class 9

BDU

Handset

Skipper FX 250

Summary of Contents for FX 250


























































































































Reviews: