Wideye FX 250 User Manual Download

Page: 50 / 121

FX 250 / FX 500 User Manual

•

Call waiting

Contain options to enable/disable call waiting services. You can also press

the Left

selection key for the following options:

•

Retrieve

Retrieve network settings of the call waiting service

•

Update

Update configured settings to the network

Note:

Always use Retrieve option to retrieve the latest settings from the network. Use

Update option to update the network settings after configurations.

•

Caller ID

Allow you to configure settings that are related to caller identifications.

•

Setting

Contain options to configure for USA or Europe caller ID type.

•

Send Caller ID

Allow you to enable/disable sending of your caller ID to the recipient

when making a call. Default is AUTO where the default network settings

are used. You can also press the Left

selection key for the

following options:



Retrieve

Retrieve network settings of the call waiting service



Update

Update configured settings to the network

Note:

Always use Retrieve option to retrieve the latest settings from the network. Use Update
option to update the network settings after configurations.

Summary of Contents for FX 250


























































































































Search results

Summary of Contents for FX 250

Reviews:

Related manuals for FX 250

Brands by name

Popular brands

Wideye FX 250, User Manual

Search results

Summary of Contents for FX 250

Reviews:

Related manuals for FX 250

Brands by name

Popular brands