FX 250 / FX 500 User Manual
26
5.3.3 Primary Handset Operations
Making a Voice Call
Before making a voice call, please make sure that:
-The Primary Handset is connected to the BDU (
status indicator should be on)
-The Primary Handset is NOT radio silent (
status indicator should be off)
-The BDU has successfully registered with the network and ready for CS domain
(voice) services (
status indicator should be on)
You can use the following two options for making a call:
•
Manual Dial:
1. Using the alphanumeric keypad, dial
00 <country code> <phone number>
.
2. Press
key.
• Using Contacts or Call Log list from the Primary Handset:
- Enter the
Contacts
list of the Primary Handset; scroll to the desired number
and press
key, or
- Enter the
Log
list of the
Primary Handset; scroll to the desired number and
press
key.
Note:
For voice calls and SMS, you may also use ‘+’ by pressing and holding the
key
instead of “00” at the beginning of dialled number string as an alternative (‘+’ <country
code> <phone number>).
To End a Call
1. Press
.
Receiving a call
When there is an incoming call, the Primary Handset will,
• Ring.
• The calling party’s number will be displayed on the screen.
If the number is stored in the contacts, the corresponding name of contact will
be displayed.
To answer an incoming call, press the
key.
Summary of Contents for FX 250
Page 1: ......