FX 250 / FX 500 User Manual
86
VI. PPPoE
By default, the
PPPoE
is disabled.
1. Select
Enable
.
2. Click
Update
.
3. Once the PPPoE service is enabled, a pop-up message box indicates the PPPoE
service is activated and requires rebooting of terminal for the service to take effect
VII. Setting
You can select the Ethernet mode to be used for data connection.
Follow these steps to select the Ethernet mode:
1. Select the desired mode to be used during the data connection:
•
Router (Single User) is with NAT/PAT disabled
•
Router (Multi-User) is with NAT/PAT enabled for multi-user.
Note:
You cannot change the Router settings while a Data connection is active, you must
first disconnect your Data session.
2. Check
“Always On (Auto PDP Context Activation)” if required.
3. Click Update to allow the selection to take effect.
4. Click
Refresh
to query the current mode.
Summary of Contents for FX 250
Page 1: ......