User Manual – Network Video Recorder
65
Chapter 5
Recording and Capture Settings
The picture capture is supported by the DS-9600/7700/7600NI series NVR only.
5.1 Configuring Parameters
Purpose:
By configuring the parameters you can define the parameters which affect the image quality, such
as the transmission stream type, the resolution and so on.
Before you start:
1)
Make sure that the HDD has already been installed. If not, please install a HDD and
initialize it. (Menu>HDD>General)
HDD- General
2)
Check the storage mode of the HDD
Click
Advanced
to check the storage mode of the HDD.
If the HDD mode is
Quota
, please set the maximum record capacity and maximum picture
capacity. For detailed information, see
Chapter
If the HDD mode is
Group
, you should set the HDD group. For detailed information, see
Chapter Configuring HDD Group for Recording and Capture.
HDD- Advanced
Step 1
Enter the Record settings interface to configure the recording parameters:
Menu > Record > Parameters
