User Manual – Network Video Recorder
126
Step 3
Select the VCA detection type to
Face Detection
.
Step 4
Check the
Enable
checkbox to enable this function.
Step 5
Click
to enter the face detection settings interface. Configure the trigger channel,
arming schedule and linkage action for the face detection alarm. Please refer to step3~step5
of
Chapter 8.1 Setting Motion Detection Alarm
for detailed instructions.
Step 6
Click the
Rule Settings
button to set the face detection rules. You can click-and-drag the
slider to set the detection sensitivity.
Sensitivity:
Range [1-5]. The higher the value is, the more easily the face can be detected.
Set Face Detection Sensitivity
Step 7
Click
Apply
to activate the settings.
9.2 Vehicle Detection
Purpose:
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Step 1
Enter the VCA settings interface.
Menu> Camera> VCA
Step 2
Select the camera to configure the VCA.
Step 3
You can click the checkbox of
Save VCA Picture
to save the captured pictures of VCA
detection.
Step 4
Select the VCA detection type to
Vehicle Detection
.
Step 5
Check the
Enable
checkbox to enable this function.
