Operation
Thermostatic function
The thermostatic function must control the unit to
keep the compartments temperature values set by the
user on the Control Panel.
Compressor, compressor fan, evaporator fan and
damper control is performed using the temperature
values measured through the 2 NTC sensors of the
unit. The evaporator is equipped with a defrost
heater. The cold airflow in the refrigerator
compartment is regulated opening or closing an
electrical damper.
The thermostatic function must be suspended during
a defrost procedure, it will be resumed after the
defrost end.
Summary of Contents for WSE 2930 W
