Whirlpool WSE 2930 W, Manual

Page: 27 / 101

The “Eco Modus” function can be used to save energy.
15 seconds after activating the Eco function the display goes OFF and only the
symbol is visible (like a screensaver).
Whenever the control panel is used (mainly water/ice, open a compartment door
etc.), the display will come back for 15 seconds. After 15 second it will go back to
the screensaver Mode and the ECO icon is visible.
Note: This function does not disconnect the appliance from the power supply.
Operation
Characteristics of settings: Eco Modus
Activation of “Eco Mode”:
1. Press the ice & water button and the reset alarm button at the same time for 4 seconds.
2. After the 4
seconds the “Eco” icon will turn ON and 11 seconds later the display turns OFF.
3. The buzzer sounds one time.
Deactivation of the “Eco Mode”:
1. Press the ice & water button and reset alarm button at the same time for 4 seconds.
2. After 4
seconds the “Eco” icon will turn OFF and 13 seconds later the display remain ON.
3. The buzzer sounds one time.
Note: If there exist a power supply interuption, the
„Eco“ function is also deactivated.