3-24
REMOVING THE OVEN DOOR GASKET
WARNING
FIBERGLASS GASKET
ENTER HOLES HERE
1. Turn off the electrical supply to the range.
2. Open the oven door, pull the clips on the old
fiberglass gasket out of the holes in the front of
the oven (you may need pliers to do this).
3. Remove any kinks from the new oven door
gasket and clip it to the front of the range.
4. Close the oven door and check to make sure
that the gasket seal is tight and even around the
door.
Electrical Shock Hazard
Disconnect from electrical supply before servic-
ing unit.
Failure to do so could result in death or electrical
shock.
CAUTION:
When you work on the electric range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
FIBERGLASS
GASKET
SNAP CLIP
INTO HOLE
OVEN
LINER
