page 2 – 13
L-8 / Sep 2013
S U R F A C E C O N F I G U R A T I O N
Monitor Config Tab
The Control Room, Headphone,
and Studio monitor outputs are nor-
mally interrupted with cue audio
whenever a fader is switched into
cue. However, if the
Cue Defeat
box
is checked for a given monitor, then
cue will no longer interrupt that moni-
tor output.
The output levels of the three moni-
tors normally follow their respective
level controls on the L8-CR Control
Room Module and the L8-SC Studio
Control Module. But it is possible to
lock the level of each of the monitors.
Using the studio monitor as an
example, adjust the STUDIO level
control on the L8-SC to the desired
level, then check the
Level Locked
box
in the
Studio
section of the Monitor
Config tab. The monitor output will
remain at the fixed level regardless
of any changes in the STUDIO level control position. If at a later time you decide to
unlock the level, the level will still be unchanged until the next time the STUDIO knob
is moved, at which point it will follow the knob once again.
After making changes you must click
Apply
for the changes to take effect. If you’ve
made a change and decided you don’t want to make that particular change after all you
can click
Cancel
, which will cancel any changes you made since entering the Monitor
Config tab, or since you last clicked
Apply
.
