page 2 – 7
L-8 / Sep 2013
S U R F A C E C O N F I G U R A T I O N
Display Brightness
– The brightness of the displays can be controlled globally by the
settings in this region. The displays brightness varies from a setting of 1 (which is off)
to a maximum of 16. The displays also have a screen-saver mode. After a specified
time, the display brightness will be automatically dimmed to an alternate brightness
setting. When a button is pressed or an encoder is turned, the brightness returns to the
normal level.
• Normal Level – This control specifies the normal brightness level of the display.
The possible values vary from a low of 1 (off) to a high of 16.
• AutoDim Level – This control specifies the brightness level to be used when the
displays are in screen-saver mode. The possible values vary from a low of 1 (off)
to a high of 16.
• AutoDim Timeout – This control specifies how long (in minutes) to wait before
entering screen-saver mode. The Control Surface controls must be idle before en
-
tering screen-saver mode. The allowed values range from 1 to 59 minutes. A value
of 0 is also allowed and is used to turn off the screen saver mode.
Timer Display Format
– The time of day is shown on the L-8 and can be shown in
12-hour format or 24-hour format. The default format is 12-hour. To change to 24-hour
format, check the
24 hours
check box.
L-8 / Jan 2015
L-8 / Dec 2016
