BDA CS 300
– 06/15 – REV. B
Page 68 / 84
+
Before mounting the tool head or
adapter, please pay attention that the
ram of the machine is in the lowest
position. If the ram is in another/wrong
position, please follow the instructions of
chapter 7.1.
+
Switch off the electric Crimping Machine
CS 300.
+
Pull out the pins
1
of the holding device
until they stop.
+
Install the tool head or adapter on the
machine from above.
INFORMATION
+
The CSE 30 tool heads supplied as of
March 2016 have been optimized
according to the latest guidelines. Due to
the spring guided closing mechanism,
the tool heads are always closed.
+
After having mounted the adapter or tool
head, lock pins
1
of the holding device
(Fig. 8.1/8.2).
1
1
Fig. 8.1
Fig. 8.2
Mounted CSE 30 tool head
Mounting of CSV 10 Adapter
