Wezag CS 300, Operating Instructions Manual

Page: 65 / 84

BDA CS 300
– 06/15 – REV. B
Page 65 / 84
INFORMATION
After ram position 10 the machine returns into the full crimping cycle mode.
7.3 Set-up Menu Key Position I
The set-up menu is only allowed to be used by supervisors or authorized personnel. Settings
to remedy mechanical errors or dysfunctions can be made in this menu.
INFORMATION
+
Key position I is only allowed to be used by supervisors or authorized personnel!
Key position I:
Set- Up Mode. The safety function of safety
buttons is deactivated. The machine can be
operated by pressing the foot pedal (only for
supervisors or authorized personnel!).
The display shows the following symbol: .
Touching the icon to enter the set-up
menu (Fig. 7.8).
To quit the Set-Up Mode, touch icon
Ram Position Stroke of the Ram
Step 01 ca. 3 mm
Step 02 ca. 4 mm
Step 03 ca. 5 mm
Step 04 ca. 6 mm
Step 05 ca. 7 mm
Step 06 ca. 8 mm
Step 07 ca. 9 mm
Step 08 ca. 10 mm
Step 09 ca.11 mm
Step 10
ca. 12 mm
(closed dies)
max. position
of the ram
(position 10)
min. position of the ram (position 0)
Counter:
759.103
Step
05
Counter:
759.103
Fig. 7.5
Fig. 7.7
Fig. 7.6