BDA CS 300
– 06/15 – REV. B
Page 78 / 84
11.3
Jumper on the board (Change of speed)
DANGER
+
Should the user make any changes to the machine without consulting the manufacturers
or the suppliers, the latter will not be liable for any damage that may result.
By changing the position of the jumper
1
(Fig. 11.4/11.5) on the control board, it is
possible to operate the electric Crimping
Machine CS 300 with a speed of 20mm/sec.
This is not compliant with the CE
guideline!
If the position of the jumper
1
on the control
board is changed (Fig. 11.5), the following
error
prompt
appears:
048111000x19
Despite the error prompt, the electric
Crimping Machine CS 300 can be operated
as usual.
Compliant with CE
guideline (max. 10
mm/sec.):
Not compliant with CE
guideline (max. 20
mm/sec.):
759.103
Counter:
048111000x19
1
1
Fig. 11.3
Fig. 11.4
Fig. 11.5
