Westfalia 7163-9001-044 Operating Instructions And Spare Parts List Download Page 88

Page: 88 / 143

Accessories

15.2 Additive Dispenser

CAUTION! In order to avoid injuries due to

rotating parts on the powder outlet of the

additive dispenser

before

carrying out any kind of operation on the additive dispenser, it

is imperative to make the automatic feeder currentless by turning the main switch to

„0/OFF“ or by pulling the mains plug.

You can only connect

one

additive dispenser to the automatic feeder (either for powder

for liquid additives). The automatic feeder is equipped as a standard with a cable with cubi-

cle plug for the additive dispenser.

For mounting or installation of the additive dispenser, refer to instructions manual

„Precision Doser for Powder Additives or Dosing Pump for Liquid Additives“.

15.3 Fully Automatic Heat Exchanger Cleaning

The fully automatic heat exchanger cleaning facilitates fully automatic time--controlled

cleaning with detergent (up to 2 times/day) of all milk--supplying parts of the automatic calf

feeder except for the suction hoses. In this way, milk deposits or similar dirtying are

removed.

Refer to chapter 12.3.3, page 74 „Cleaning, Cleaning Values Heat Exchanger“

Summary of Contents for 7163-9001-044
















































































































































Search results

Summary of Contents for 7163-9001-044

Reviews:

Related manuals for 7163-9001-044

Brands by name

Popular brands

Westfalia 7163-9001-044, Operating Instructions And Spare Parts List

Search results

Summary of Contents for 7163-9001-044

Reviews:

Related manuals for 7163-9001-044

Brands by name

Popular brands