Westfalia 7163-9001-044 Operating Instructions And Spare Parts List Download Page 70

Page: 70 / 143

Functions of the Cleaning Key

12.2 Selecting the Options

You can only select one of the available options. The selected option is marked by an

asterisk in the second line of the display.

Press ENTER to change the option. The displayed option starts flashing. Press Arrow Up/

Arrow Down to scroll the available options. Press ENTER to confirm the desired option.

This option is marked by an asterisk and stored. In case you do not wish to modify the op-

tion, press the Cleaning key once to return to the corresponding submenu.

Example for the selection of options within the functions of submenu

„Settings“:

cleaning mixer

cleaning HE

settings

air cleaning

pre-/afterrinse

x l

cleaning HE/hose

Summary of Contents for 7163-9001-044
















































































































































Search results

Summary of Contents for 7163-9001-044

Reviews:

Related manuals for 7163-9001-044

Brands by name

Popular brands

Westfalia 7163-9001-044, Operating Instructions And Spare Parts List

Search results

Summary of Contents for 7163-9001-044

Reviews:

Related manuals for 7163-9001-044

Brands by name

Popular brands