29
Setting the Heating
5.8 Heating for Milk Powder Outlet and Protection against Frost
CAUTION! In order to avoid injuries due to electric shocks,
before
opening the control
unit it is imperative to make the automatic feeder currentless by turning the main switch to
position „0/OFF“ or by pulling the mains plug.
Inside the power unit is located a distribution board with integrated switches. The left
switch is used for switching on and off the heating for the milk powder outlet. The right
switch is used for switching the heating cable on and off.
In summer it is imperative to set both switches to „0“ ( = OFF )!
The heating for the milk powder outlet prevents formation of condensate on the milk
powder outlet.
The heating cable with temperature control is available as an accessory and can be retrofit-
ted at any time. It is active when temperature falls below 3
G
C and protects hose pipes, sole-
noid valves and pressure reducer against frost. We recommend to mount a heating cable in
case the calf feeder should be installed in an unprotected location exposed to extreme cold.
Summary of Contents for 7163-9001-044
