![background image](http://html1.mh-extra.com/html/westfalia/60-21-02/60-21-02_instruction-manual_962777040.webp)
35
Calculations and Memory Management
The result and the units of measurement (y.y
3
, ft.ft
3
, or m
3
) are displayed.
To subtract areas ad volumes, use
instead of
.
Saving Measured Values:
The distance meter is equipped with SEVEN memory registers, of which 5 act
as memory (M1 to M5) and 2 as calculation memory (buffer memory and
).
The 5 Memory Registers (M1 to M5)
To see which memory registers are occupied, activate the unit with a random
measuring and then press
. Only the memory registers, which contain data
appear in the display. If no data at all is stored, no memory register is
displayed.
When you press
again, the first memory register (M1) flashes and further
pressing lets the other registers (M2 to M5) flash one after another.
To wipe all memory registers at once, press
repeatedly, until all 5 memory
registers flash. Now press
and all stored memory is erased.
To store a measured value, do as follows:
If you have measured a distance, area, or volume, the value is shown in the
display. Press
repeatedly, until the memory register (M1 to M5), in
which you want to store the value, flashes.
After that, press
and the displayed value is saved. The memory register
(M1 to M5) will disappear in the display.
Displaying a Saved Value:
To have a stored value displayed, press
repeatedly, until you have
reached the desired memory register (M1 to M5).
When you have reached the desired memory register, press
to have
the value stored there displayed.