Western CP600, Operation Manual

Page: 108 / 134

CP600 Pivot Operation Manual
POM-EN-Dec
ember 20
18
108 Section 4-10
Panel Operation
Auto Restart Option
Auto Restart Option:
The Auto restart option allows the machine to automatically resume operation after a loss of in-
coming power occurs. Using a timer, the option will automatically energize the Start circuit if in
Auto, starting the machine. If in Hand, the timer pulse is not applied to the Start circuit so the ma-
chine remains Off.
Auto Restart Off:
Place the selector switch in the position shown below to prevent the machine from automatically
restarting after a power failure
Auto Restart On:
Place the selector switch in the position shown below to allow the machine to automatically restart-
ing after a power failure