Western CP600, Operation Manual

Page: 101 / 134

CP600 Pivot Operation Manual
POM-EN-Dec
ember 20
18
101
6. Future Option: N/A
7. Future Option: N/A
8. Option Auto Restart Off / On: Overrides the Auto-Restart option, and prevents the machine from
starting in the event of a power outage, or from automatically starting the machine from a remote
location.
9. Dry, Wet, Aux: Dry-No water or fertilizer; Wet-water only; Aux- Water and Fertilizer.
10. Determines the direction of travel and enables the auto-reverse or auto-off feature. If the au-
to-reverse feature is used, turn the selector switch to AUTO and turn the Stop-Run-Start switch
to Start. The machine will travel in the direction that the Auto Reverse option is currently set to. If
Auto Off is used, simply place the selector switch in the desired direction, then Start the system.
Machine will move in the selected direction and stop when the machine reaches the barricade.
Note: Forward is to be clockwise.
11. Stop, Run, Start: Stop or Start machine
WARNING! CARE SHOULD BE TAKEN WHEN USING THE SAFETY OVERRIDE FEA-
TURE. SEVERE MISALIGNMENT MAY RESULT IN STRUCTURAL DAMAGE. DO NOT
USE OVERRIDE UNLESS MACHINE IS IN COMPLETE VIEW.
12. Safety Override: The machine shutdown feature may be overridden by pressing the safety
override button and turning the Stop, Run, Start switch to “START”.
13. iControlRemote
See Section 1-6 for proper machine alignment.
Section 4-3
Panel Operation
Panel Identification