EcoDesign Disclosures
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
Figure 28:
Rear System LED PCBA Removal
Step 13 :
Remove the fan bracket.
Note:
Removing the fan bracket and IOM bulkhead will allow access to the
midplane and PDBs.
a.
Using a T7 Torx screwdriver, remove the eight (8) screws from midway along both sides of
the Chassis, and remove the eight (8) screws from the inside-bottom of the fan bracket (16
screws total):
Figure 29:
Fan Bracket Screw Locations
b.
Lift the fan bracket to remove it from the Chassis:
17
