EcoDesign Disclosures
1. EU EcoDesign Disclosures
1.4 Chassis Disassembly
b.
Pull down slightly on the release handle to unseat the Drive Assembly. Then pull the handle
to remove the Drive Assembly from the enclosure:
Figure 2:
Drive Assembly Removal
c.
Repeat these steps to remove the remaining Drive Assemblies.
Step 4 :
Uninstall the Power Supply Units (PSUs).
a.
At the rear of the enclosure, grasp the ring handle of a Power Supply Unit (PSU) with your
index finger, and use your thumb to press the latch release with a pinching motion:
Figure 3:
Power Supply Unit (PSU) Release Latch Operation
b.
Pull the Power Supply Unit (PSU) out of its slot:
4
