WESAUDIO
4/10/20
NGLEVELER USER MANUAL REV2
9
3.
Front panel
1)
Power switch.
2)
Power LED indicator.
3)
H-LINK - indicates unit’s connection to HOST – this led will be enabled if plug-in is
connected to this particular unit.
4)
Data - indicates that data is being sent from DAW plug-in to the device. Please
note that for Ethernet connection any communication to the device will cause
this led to indicate traffic.
5)
IN metering – signal level for each channel measured after PAD, however before
ngLEVELER main circuit (Leveling, THD, Solo, Mute).
6)
OUT metering – signal level for each channel measured after ngLEVELER main
circuit.
7)
IN 1-8 DB-25 socket - input to channels 1-8.
8)
OUT 1-8 DB-25 socket - output from channels 1-8.
9)
IN 9-16 DB-25 socket - input to channels 9-16.
10)
OUT 9-16 DB-25 socket - output from channels 9-16.
11)
USB socket – unit’s control USB port (GCon management connection).
12)
Ethernet socket – unit’s control Ethernet port (GCon management connection).
13)
Power socket.
Summary of Contents for ngLEVELER
