WesAudio ngLEVELER, User Manual

Page: 45 / 65

WESAUDIO
4/10/20
NGLEVELER USER MANUAL REV2
45
7.2.4. Controller functions mapping to ngLEVELER
As controllers were created mostly to serve DAW management, not all controls
exactly fits ngLEVELER needs. However because whole fader section is locked down to
exclusively control ngLEVELER(s), GCon software maps some controls to better integrate
with ngLEVELER capabilities. Please find below example of HUI/Mackie Control/Eucon
controller of how controls map to ngLEVELER(s):
 THD: changes THD setting (3 steps)
by moving the encoder (for some
controllers, THD can be toggled by
pushing the encoder).
 Channel Name – channel names
are editable from plug-in view.
 STEREO/DUAL MONO – this will
either enable Absolute link between
channels, or entirely unlink two analog
channels. Please note that this function
changes number of channels
manageable via controller faders
(please refer to
External control vs
number of channels for more
information).
 SOLO/MUTE – engages/disengages
SOLO or MUTE on the ngLEVELER.
 FADER (LEVEL CONTROL) – controls
level of particular analog channel (or
channels in stereo mode).