WESAUDIO
4/10/20
NGLEVELER USER MANUAL REV2
34
7.2.2.
ngLEVELER and DAW management via HUI/Mackie control third
party controller
This mode is an extension to “GCon server mode” and it adds mediation to DAW of
controls which are not in use to manage ngLEVELER. That means that all additional controls
on the controller which are not related to fader section will be mediated from, and to DAW.
That gives us full transport functions control from the controller, while still being able to
control all parameters of ngLEVELER. This concept goes further, and allow us to toggle
between DAW and ngLEVELER control with one of the function keys – F1 to F8 (assignable in
the GConManager application -
).
7.2.2.1.
Configuration
In this mode, configuration is little bit more complicated, as it requires us to create virtual
MIDI ports. For more information how to create Virtual MIDI Ports, please refer to chapter:
How to create Virtual MIDI ports
After our Virtual MIDI ports are created (Amount of virtual MIDI ports are connected to
number of controllers that we will use), we need to configure our setup in GConManager.
To do so, start GConManager and go to _CONTROL application:
Summary of Contents for ngLEVELER
