WesAudio ngLEVELER, User Manual

Page: 58 / 65

WESAUDIO
4/10/20
NGLEVELER USER MANUAL REV2
58
10. Usage examples
This chapter presents various configuration and usage examples of ngLEVELER.
10.1.
Summing stage automation
ngLEVELER can be integrated at any stage of analog chain which requires signal
level management or automation. One of such situation is level management or
automation of signal which goes out from our outboard gear to the summing stage. This
gives us few very important benefits:
 POST Compression automation or level management – changing signal level which
goes out from our converter (DAW automation) will cause our compressor to behave
differently. This makes it impossible to automate, and is quite problematic situation to
handle even with simple signal level balance changes. In this setup we can keep our
summing stage signal level at same level, and leave automation and signal level
management to ngLEVELER so it can be easily recalled upon session load!
 OUT signal management and automation – all outboard gear have a sweet spot
which usually depends on a signal level which comes in. In most cases we don’t
want to automate signal going in, but signal which goes out from the device. With
ngLEVELER we can easily manage this signal:
o
not to clip next analog stage,
o
Or automate it when needed!