WesAudio ngLEVELER, User Manual

Page: 39 / 65

WESAUDIO
4/10/20
NGLEVELER USER MANUAL REV2
39
7.2.3. ngLEVELER management via EUCON controller
This chapter describes ngLEVELER integration with Eucon controller. At current state
there are 3 possible solutions:
 Using EUCON workstation configuration via Mackie Control (Recommended).
 Using first DAW channel faders to control ngLeveler.
 Using Plugin Control – but in this mode, only encoder and few buttons can be used
to control ngLeveler channels – faders can’t be used.
7.2.3.1. Eucon controller in Mackie Control mode / ngLeveler
Eucon controller (e.g. Artist Mix) can control ngLEVELER(s) using a mapping described
here - Controller functions mapping to ngLEVELER . To use EUCON controller with ngLEVELER,
eucon application needs to be already installed. When it is done, Eucon engine needs be
configured in Mackie Control mode, to do so:
 Open EUCON preferences:
o
On OSX go to the System Preferences and start EUCON.
o
On Windows go Control Panel and start EUCON.
 Drag and drop GConManager application to Eucon configuration. GConManager
application can be found:
o
OSX: /Applications/WesAudio/GConManager.app
o
Windows: c:\Program Files (x86)\WesAudio\GConManager.exe
 Set the protocol to MackieControl, and MIDI ports to 1-4 (as shown below).