Wersi PEGASUS WING, User Manual

Page: 69 / 132

PEGASUS WING
1st Edition –
March 2011
– Software Version: V1.0 R01
69
MIDI Sequences
a. The lower section of the display and the MIDI control panel button flash.
b.
Use the arrow buttons to select the user level on which you wish to save the
MIDI sequence. There are 100 levels each with 10 storage places available, which
means, of course, that 1000 MIDI sequences can be loaded.
c. Now select the storage place you want and the MIDI sequence is saved onto the
instrument. A message appears to that effect. Storage places already occupied can
simply be overwritten.
d.
Confirm with OK .
Tip: If you press the button again,
a full list of all MIDI sequences
already stored on the 100 levels
appears. Chose a storage place in
this list and then confirm with
Load MIDI.
If you already know the required
storage place number, you can
input the 4 digit number with the
numeric keypad 0027.
The storage place numbers are tied
to the 100 levels. A MIDI sequence
stored in place number 0089
appears later in level 9 on button 9.
The first 3 digits indicate the level
number, but you you must always count one number higher, as the levels begin with 1
and not with 0.
0089= level 9 place 9 0125= level 13 place 5 0992= level 100 place 2
Whether you load the MIDI sequence directly with the display buttons or via the list, the
result is the same.