Wersi PEGASUS WING, User Manual

Page: 41 / 132

PEGASUS WING
1st Edition –
March 2011
– Software Version: V1.0 R01
41
6.6.7. MIDI Sequence Selection
[ MIDI = M usical I nstrument D igital I nterface = Standard for connecting digital musical
instruments and computer]
A MIDI sequence is the digital storage of a piece of music in note and programme values
with up to 16 tracks.
MIDI sequences (Files) (
WERSI = factory MIDI files and User = your
own MIDI files) are selected with the MIDI button.
You can switch between levels using the arrow
/ buttons in the
WERSI/USER button.
The available MIDI sequences are now shown in the display and
selected by tapping.
Use the Start/Stop button to start and stop your MIDI
sequences.
The MIDI sequence stops automatically when it reaches the
end.
You can use the Start/Stop button to pause playback
Press the Sync.Start button to swith the MIDI sequence
back to its beginning.
There is a list of all the available MIDI sequences in Chapter 18.4.2 on page 118.
6.6.8. Audio Selection
[MP3 = Standard for audio files, which are reduced to about 10% of their original file size by a
special compression process (with very little loss of quality).
You can load audio files (pieces of music in MP3 or wave format) with the Audio button.
After tapping the Audio button the available audio files
•
are shown in the display
•
selected by tapping
•
and then started and stopped with the Start/Stop button.
You can move through the levels using the arrow buttons
/ in the WERSI/USER button.
There is a list of all the available audio and MP3 files in Chapter 18.4.3 on page 118.