English
ENG
ORIGINAL INSTRUCTIONS
3
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times. This enables better control of the power tool
in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry. Keep your
hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught
in moving parts. If there are devices for connecting
means for extracting and collecting dust, make sure
they are connected and properly used. The use of
these devices can reduce dust related hazards.
ELECTRICAL SAFETY.
The plug of the power tool must match with the base
of the socket. Never modify the plug in any way. Do
not use any adapter plug with earthed power tools.
Unmodified plugs and matching bases will reduce
the risk of electric shock. Avoid body contact with
grounded surfaces such as pipes, radiators, cookers
and refrigerators. There is an increased risk of electric
shock if your body is grounded. Do not expose power
tools to rain or wet conditions. Water entering the
power tool will increase the risk of electric shock. Hold
this power tool by insulated gripping surfaces only.
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the power
tool. Keep the cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock. When
operating a power tool outdoors, use an extension
cord suitable for outdoor use. The use of an
extension cord suitable for outdoor use reduces
the risk of electric shock. If the use of a power tool
in a damp location is unavoidable, use a power
protected by a residual current device (RCD). The
use of an RCD reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in “off” position before
connecting to the network, or when taking or
carrying the power tool. Carrying power tools with
your finger on the switch or plugging in power
tools that have the switch in “on” position invites
to accidents.
USE AND CARE OF POWER TOOLS.
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
conceived. Do not use the power tool if the switch
cannot be positioned to “off” and “on” position
. Any
power tool that cannot be controlled with the switch
is dangerous and must be repaired. Remove the
plug from the power supply and/or battery before
making any adjustments, changing accessories
or storing the power tool. Such preventive safety
measures reduce the risk of starting the power
tool accidentally. Do not use accessories which
are not specifically designed and recommended
by Werku
®
. Just because the accessory can be
attached to this power tool, it does not assure
safe operation. Do not use a damaged accessory.
Before each use, inspect the accessory. If this
power tool or its accessory is dropped, inspect
for damage or install an undamaged accessory.
Regularly clean this power tool’s air vents. The
motor’s fan will draw the dust inside the housing
and excessive accumulation of powdered metal
may cause electrical hazards.
STORE POWER TOOLS.
Store power tools out of reach of children and
not allow the handling of power tools to people
unfamiliar with the tools or these instructions.
Power tools are dangerous in the hands of
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
there are no broken parts or other conditions that
may affect the operation of power tools. Power tools
are repaired before use when they are damaged.
Many accidents are caused by poorly maintained
power tools. Use power tools, accessories and
tool tips, etc. according to these instructions and
in the manner provided for the particular type of
power tool, taking into account the conditions work
and work to develop. The use of the power tool for
applications other than those intended could result
in a dangerous situation. Please check your power
tool serviced by a Werku
®
official repair service
using only identical replacement parts. This will
ensure the safety of the power tool is maintained.
CHECK THE POWER TOOL CONDITION.
Make sure that all the screws in the hot air gun are
perfectly tightened. In cold climates or when the hot
air gun has not been used for a period, allow the hot
air gun to warm up by leaving it to run empty for a
