2
English
ENG
ORIGINAL
CE DECLARATION CONFORMITY.
►
Werku
®
declares that the
WK400720
pressure-
washer is in accordance with the European
Directives and Standards 2006/42/CE,
EN60335-1:2012/A11, EN60335-2-79:2012 and
EN62233:2008.
La Coruña, 01/07/2019
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
►
Voltage-frequency 230V~50Hz
►
Power 3700W
►
Class I
►
Protection index IPX5
►
Speed rate
2900 min
-1
►
Working pressure 180 bar
►
Maximum
pressure 200 bar
►
Working flow 7 l/min
-1
►
Maximum flow 9.5 l/mi
n-1
►
Maximum temperature
50ºC
►
Net weight 55 kg
►
Acoustic pressure LpA
<70 dB(A)
►
Vibration Aw <2.5 m/s².
PICTOGRAMS.
Attention
Risk of electric shock
Do not connect directly to water mains
Risk of high pressure jet
Read instruction manual
Use eye protection
Use hand protection
Use body protection
European conformity
Double insulation
Waste electrical and electronic equipment
SAFETY INSTRUCTIONS.
►
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions
listed below may result in electrical shock, fire
and/or serious injury
►
Keep all warnings and
all instructions for future reference
►
Accidents
can be avoided in many cases by recognizing a
potentially hazardous situation before it occurs and
by observing appropriate safety procedures
►
Do
not use this pressure-washer for other applications
than those specified in this manual.
ELECTRIC COMPONENTS.
►
Danger; risk of electric shock
►
Never touch
the mains plug and the socket with wet hands
►
Check the power cord with mains plug for
damage prior to every use
►
Immediately have
damaged power cord replaced by an authorised
customer service / electrician
►
Do not operate
an appliance if the power cord is damaged
►
All
current-conducting parts in the working area must
be protected against jet water
►
The mains plug
and the coupling of an extension cable must be
watertight and must never lie in water
►
Moreover,
the coupling may never lie on the ground
►
The
use of cable reels that ensure that the sockets are
at least 60 mm above the ground is recommended
►
Make sure that the power cord or extension
cable is not damaged by running over, pinching,
dragging or the like
►
Protect the power cords from
heat, oil, and sharp edges
►
Turn off the appliance
and remove the mains plug prior to any care and
maintenance works
►
Repair work and work on
the electrical components may only be performed
by an authorised customer service
►
Warning; the
appliance may only be connected to an electric
supply that has been installed by an electrician in
accordance with IEC 60364
►
The appliance may
only be connected to alternating current
►
The
voltage must correspond with the type plate of the
