17
Fiber Optic Cable Sensor
Function
Description
Distance
Enter the Measurement Distance
By pressing the key + resp. – the distance between the two
Measurement points is set *.
Minimal value: 10 mm; Maximal value: 10000 mm
Channel 1
Set Measurement Point 1
By pressing the key + and – the first measurement point for the speed
measurement is selected under the connected Sensors.
Channel 2
Set Measurement Point 2
By pressing the key + and – the second measurement point for the
speed measurement is selected under the connected Sensors.
Edge
Set Edge
For the determination of the speed the rising (positive)
or the falling (negative) edge of des switching signal can be used.
By pressing the key + and – the rising or the falling edge is selected.
Out. config
Output configuration
• Mode:
è
Bigger: The output switches as soon as the
measurement speed is higher than value 1.
è
Smaller: The output switches as soon as the
measurement speed is lower than value 2.
è
Between: The output switches as soon as the measure-
ment speed is between value 1 and value 2.
• Value 1: Entry of lower speed
• Value 2: Entry of upper speed**
* Press and hold the + or – key in order to scroll quickly through the numbers.
** Only if mode “Between” is activated.
Summary of Contents for ODX402P0088
Page 23: ...23 Fiber Optic Cable Sensor...
