4
1. Refer to the cover illustration to determine the number of the cabinet being installed.
2. Refer to the appropriate assembly procedure for the basic cabinet:
3. If the cabinet will have doors, also refer to pages 59 - 67.
4. To secure two or more cabinets together, or to secure the cabinet(s) to the back wall,
also refer to pages 68 - 70.
NOTE:
Depending on which cabinets are being installed, there may be some extra fasteners or other
hardware left over after the installation is completed.
I
NSTALLATION
P
ROCEDURES
O
VERVIEW
It is suggested that the cabinets are setup in a space that is large enough (approximately 25' x 25')
to safely handle the cartons, pieces, finished cabinets, and dunnage.
Inspect the condition of the wall and floor where the cabinets will be located. If the wall is not straight,
establish a reference line so that the fronts of all cabinets will line up. Also, determine the highest point
on the floor, which will establish the leveled height of each row of cabinets.
Build only one cabinet at a time, to avoid intermixing parts. Build each according to the instructions in
this manual for the specific model.
Do not
start installing doors until all cabinets are assembled and in
their final location, leveled, and bolted to adjacent walls and cabinets.
After all cabinets are in place, distribute the door cartons and door hardware sets to each cabinet.
Assemble and hang the doors one at a time according to the instructions. Then clean off any
fingerprints, dirt, and dust, using a clean rag and Fantastic (or comparable) spray cleaner or acetone.
B
EFORE
Y
OU
B
EGIN
Keep the Packing List with the cabinet, for reference until the unit is completely assembled.
•
Read the complete assembly procedure before beginning to assemble the cabinet.
•
The cabinet carton is marked with the “Cabinet Number” as shown on the cover of this manual.
•
Hardware packs may contain extra fasteners that will not be required on your cabinets.
•
Because of the variety of possible wall surfaces, wall fasteners are not included.
Have your maintenance personnel recommend an appropriate type for safe, secure attachment
and have the fasteners available before assembling the cabinet.
•
At least two people (preferably four) are required to assemble the cabinet and set it upright.
B
EFORE
I
NSTALLATION
