3
Before You Begin
1. Read and understand the complete assembly procedure before beginning.
2. A licensed electrician must install all distribution connections for the electrical service shown
in the unit plan.
3. Clear the construction area and allow twelve inches of space around the module.
4. Place all parts into stacks of similar part numbers where they can be easily reached.
Components are large and
heavy and must be moved by
two people working together.
Moving doors requires four
people working together.
!
CAUTION
All electrical connections
and electrical installation
must be done by a licensed
electrician.
!
WARNING
The electrical source must be
permanently wired with the
Power Panel Kit and comply
with local electrical codes.
!
WARNING
Required Tools
The following tools are required to assemble the
SoundLok Sound-Isolation Room.
·
Mallet
·
Flat Head Screwdriver
·
Phillips Head Screwdriver
·
Box Level
·
Tape Measure
·
Channel Lock Pliers
·
Socket and Rachet Set
·
Small Pry Bar
·
5
/
16
" Hex Allen Wrench
·
Work Gloves
·
Goggles
The following tools are required to assemble the
Inset Floor Option.
·
Drill
·
Phillips Head Drive Bit
·
1
/
8
" Drill Bit
·
Hack Saw
