17
Installation (continued)
Ceiling Panels
1. Position the first end ceiling panel at the end of the room with the roto locks facing inside the room.
2. Loosely attach the ceiling panel to the frame rail using a
1
/
4
" flat washer and a
1
/
4
-20 x
3
/
4
" capscrew through each of the pre-drilled holes in the frame rail and
into the cage nuts located underneath the skin of the ceiling panel.
Leave the ceiling panels loose to allow for adjustment while installing additional panels.
IMPORTANT: Do not push too hard on the capscrews,
or the cage nut under the ceiling panel skin could
be damaged.
1
/
4
-20 x
3
/
4
"
Hex Head
Capscrew
1
/
4
" Flat
Washer
First End
Ceiling Panel
End Panel
Roto Lock
Locations
Cage Nut
Location
