13
1. The bottom shelf must be removed to access the
levelers.
a. Remove the four screws that secure the shelf
to the locker.
b. Pull the shelf out.
c. Set the shelf and screws aside to reattach
later.
Do not reattach the bottom shelf until the
lockers are attached to the structure.
2. Move the lockers to be within a few inches of their
final location according to the layout drawings.
3. Turn the levelers to adjust the height at each
corner.
Installation without Metal Base
The lockers must be leveled to each other before attaching them together.
Pull
shelf out
Remove
screws
Turn to
adjust height
The lockers can be installed with or without a metal base.
This is the procedure for installing without a metal base!
For installing with a metal base, go to page 9.
STOP