LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
28
200 –e164-2 300….
) User can disable one number and the number after this one. Ex. from
set 1-5 is configured, if user set the third number as “x”, from third to fifth number will be
disabled at the mean time. (ex.
h323 –e164-2 x
)
9.
–alias
: identify ID for the LAN Phone 101/201 to register to the GateKeeper
(h323 –alias
“X”).
.The default alias is related to MAC address of LAN Phone, so each LAN Phone has
different alias.
10.
–tokenpwd
: To set RRQ/ARQ authentication token password.(
h323 –tokenpwd
“password” ; h323 –tokenpwd x
to disable this function
)
(A) LCD menu password:
User can enter LCD system configuration by key in this
password and default value is lowercase “x.” (press TRANSFER to switch lowercase
and uppercase).
(B) H.235 security:
To set RRQ/ARQ authentication token password. If LAN Phone
wants to register to a GateKeeper, which implement H.235 security token feature,
LAN Phone has to set a RRQ/ARQ authentication token password, which is provided
by GateKeeper manager. LAN Phone can’t work normally with this GateKeeper
unless Token Password is set.
11.
–gkdis
: set auto discovery function on or off. If this function is enabled and IP address of
GateKeeper is set as 255.255.255.255, LAN Phone will multicast to search a GateKeeper
on network with configured GateKeeper name(please refer to 6.-
gkname
); if IP address of
GateKeeper is set, before LAN Phone register to the assigned GateKeeper, it will send out
GRQ(GateKeeper Request) message with configured GateKeeper name to GateKeeper
first.
12.
–rtp
: assign RTP port number(1024-65535)
13.
–ttl
:set RAS TTL time(0-3600 second)
14.
–gkfind
: assign GateKeeper finding port number(1024-65535)
15.
–ras
: assign GateKeeper RAS port(1024-65535)
16.
–range
: assign dynamically allocated port range(1500-65535)
17.
–respto
: set max waiting time for first response to a new call. After dial phone No. without
getting response in max waiting time, user will hear busy tone.(1-200 seconds)
18.
–connto
: set max waiting time for call establishment after receiving first response of a new
call (1-20000 seconds).
Note: 1.Items from 9-16 are for advanced user only.
2.In Peer-to-Peer mode,
h323 –print
will only display e164, alias, mode ,
RTP port, and allocated port range.
3.In P2P mode, please dial “#” after press IP address (ex.10.1.1.1 please dial
10*1*1*1#) or e.164 of Phone book (Please refer to chapter 3.9 Pbook
