![background image](http://html1.mh-extra.com/html/welltech/fxso-gateway-sip-3701a/fxso-gateway-sip-3701a_manual_955959026.webp)
LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
25
Note:
1. For now we only support DDNS server as
www.dyndns.org
.
2. User must register to
www.dynsns.org
first, and specify user name and password in
ddns -id
and
ddns –passwd
.
3. The default IP address of DDNS login server is
member.dyndns.org
, which is login server of
www.dyndns.org
.
4. User has to specify domain name applied for LAN Phone in
ddns –hostname
.
5. The default IP address of check IP server in is
checkip.dyndns.org
, which is check IP server of
www.dyndns.org
.
11.[pppoe] command
Note:
Firmware of LAN Phone are separate into normal version and PPPoE version.
1. In Normal version has no TOS command.
1. -print: display system overall information and configuration. IF LAN Phone has already
connected to PPPoE server, user can see IP address and related information with this
command.
2. -dev: to enable or disable PPPoE function.(
pppoe –dev 0/1
)
3. –open: to open PPPoE connection(If LAN Phone is not in PPPoE connection, user can try to
connect with
pppoe -open
)
4. –close: to close PPPoE connection(If LAN Phone is in PPPoE connection, user can
disconnect with
pppoe -close
)
5. –id: to set PPPoE connection user name
6. –pwd: to set PPPoE connection password
7. –reboot: If user enable this function, after PPPoE being disconnected, LAN Phone will
automatically reboot to re-connect, and after reboot, if LAN Phone still can’t get contact
with server, LAN Phone will keep trying to connect. On the other hand, if user disable this
function, LAN Phone won’t reboot and keep trying to connect.(
pppoe –reboot 0/1
)